clavier sans accents

Ça faisait un moment que je n'avait plus d'accent sur le clavier en console
alors voilà ce que j'ai fait:

4.2 Configurer la console

---

4.2.1 Ce qu'il faut faire

• Pour l'entrée, de remplacer la table par défaut par la carte latin-0 (norme ISO-8859-15) :

       dpkg-reconfigure console-data

  Choisissez Select keymap from arch list (en anglais),pc / azerty / French, Same as X11 (latin9) / Standard

• Pour la sortie, d'ajouter SCREEN_FONT=lat0-16 dans le fichier de configuration /etc/console-tools/config

Voici le fichier config :

---

#
# This files tells the console-tools package:
#
# - whether to load a specific font and boot (and maybe a screen-font map,
# but you should avoid that if possible).
# - whether to setup an Application-Charset Map other than the default CP437.
# - whether to start "vcstime" to have time on all text VC'S.
#
# You can also specify per-VC settings by suffixing variable names as in
# the examples below. This only works on framebuffer devices.
#
# CAVEATS:
#
# - When using the new framebuffer devices, the "global setting" for a font
# only affects the current console (ie., at boot-time, the first one)
# - ACM setting involves 2 steps (maybe loading a user ACM, and activating
# it on a given charset slot - see charset(1) for details), the 1st of which
# affects the entire system, but the 2nd of which only affects the current
# VC (ie., at boot-time, the first one).  So that if you want to use the same
# ACM on all VCs, you have to specify "APP_CHARSET_MAP_vc<N>=user" for all
# relevant values of <N>.
#
# Example:
#
#SCREEN_FONT=iso01.f16
#SCREEN_FONT_vc2=LatArCyrHeb-16
#
#APP_CHARSET_MAP=iso05
#APP_CHARSET_MAP_vc2=user
#
# Set the following - more euro-friendly default than kernel font.
# SCREEN_FONT=latcyrheb-sun16.psf

#DO_VCSTIME=yes
#
# Forget this one unless you _know_ it is necessary for your font:
#SCREEN_FONT_MAP=iso01

#  **** screen saver/DPMS settings: all VCs ****
# These settings are commented by default to avoid the chance of damage to
# very old monitors that don't support DPMS signalling.

# screen blanking timeout.  monitor remains on, but the screen is cleared to
# range: 0-60 min (0==never)  kernels I've looked at default to 10 minutes.
# (see linux/drivers/char/console.c)
BLANK_TIME=30

# blanking method (VESA DPMS mode to use after BLANK_TIME, before powerdown):
# on: the default, no DPMS signalling. near instant powerup, no power saving
# vsync: DPMS Standby mode. nearly instant recovery, uses 110/120W (17" screen)
# hsync: DPMS Suspend mode. typically 3s recovery, uses 15/120W (17" screen)
# powerdown,off: DPMS Off mode, typ. 10s recovery, uses  5/120W (17" screen)

# Those values are for my 17" Mag, but some monitors do suspend the same as
# standby.  xset dpms force {off|standby|suspend|on} is useful for this, if X
# supports DPMS on your video card.  Set X's DPMS screensaver with xset dpms
# or use option power_saver in XF86Config
#
# DPMS set by default to on, because hsync can cause problems on certain
# hardware, such as Armada E500 laptops
BLANK_DPMS=off

# Powerdown time.  The console will go to DPMS Off mode POWERDOWN_TIME
# minutes _after_ blanking.  (POWERDOWN_TIME + BLANK_TIME after the last input)
POWERDOWN_TIME=30

# rate and delay can get only specific values, consult kbdrate(1) for help
#KEYBOARD_RATE="30"
#KEYBOARD_DELAY="250"

# Turn on numlock by default
LEDS=+num
SCREEN_FONT=lat0-16
#SCREEN_FONT=lat9u-16
SCREEN_FONT_vc2=lat0-16
SCREEN_FONT_vc3=lat0-16
SCREEN_FONT_vc4=lat0-16
SCREEN_FONT_vc5=lat0-16
SCREEN_FONT_vc6=lat0-16

• ---

  On relance le démon :

  
       /etc/init.d/console-screen.sh restart
  

Tout est ok ....

Comments

[sirius911]

avec le fr-X11 la touche windows ne fonctionne pas
j'ai donc fait un
loadkeys fr-latin0
et pour l'instant ça marche... à suivre...

[sirius911]

Il y a des moments où je perd le clavier
je regarde du côté de loadkeys fr-x11.
à voir si je vais pas devoir faire un lien de
/etc/console/boottime.kmap.gz vers
/usr/share/keymaps/i386/azerty/fr-x11.kmap.gz
à voir ...